Abstract
A two-monochromator reference spectrofluorimeter has been developed at the National Research Council of Canada in accordance with International Commission on Illumination and American Society for Testing and Materials colorimetry standards to permit high-accuracy total spectral radiance factor measurements of fluorescent materials. This fully automated instrument employs a xenon-arc light source, all-reflective optics, two grating monochromators with order-sorting filters, a cooled photomultiplier tube analyzing detector, and a calibrated silicon photodiode monitor detector. The instrument operating range is 250–1050 nm with a selectable bandpass (optimized for a 5-nm resolution), and the measurement geometry is 45° annular illumination and 0° viewing (45/0). We describe the instrument’s design, testing, and verification procedures. Systematic errors that have been determined and corrected for include instrument polarization, beam nonuniformity, wavelength shifts, stray light, and system drift. The wavelength accuracy and reproducibility are estimated to better than ±0.1 and ±0.03 nm, respectively. The photometric short-term repeatability and long-term reproducibility are estimated to be better than ±0.15% and ±0.5%, respectively. The overall photometric accuracy is better than 1% of the value over a wide range of reflectances, and the reproducibility of the color specification of a fluorescent material is better than 0.25 ΔEab units.
© 1997 Optical Society of America
Full Article | PDF ArticleMore Like This
Jian Liu, Mario Noël, and Joanne Zwinkels
Appl. Opt. 44(22) 4631-4638 (2005)
Joanne C. Zwinkels and Denis S. Gignac
Appl. Opt. 31(10) 1557-1567 (1992)
Silja Holopainen, Farshid Manoocheri, and Erkki Ikonen
Appl. Opt. 47(6) 835-842 (2008)