Abstract
The fabrication and principal characteristics of an electrically calibrated absolute radiometer are described. The receiver substrate incorporates an evaporated chromium–nickel thermopile, an electrical shield, a copper thermal diffuser disk, an evaporated chromium electrical heating element, and a goldblack absorber. All insulating layers are evaporated silicon monoxide; the thermopile and heater are made by a photoetching process. The performances of several radiometers are discussed. For example, a 28-junction version has a responsivity and NEP of 93 mV/W and 50 nW, respectively, in air, with a time constant of 15 sec and a surface responsivity uniform to better than 1%. The radiometers require only a few corrections of small magnitude. An analysis of sources of error and residual uncertainties shows that the over-all precision of this type of radiometer is at least 0.5% for a power level of 50 μW. Comparative radiometric measurements are described that support this claim.
© 1978 Optical Society of America
Full Article | PDF ArticleMore Like This
Louis-Philippe Boivin and Francis T. McNeely
Appl. Opt. 25(4) 554-561 (1986)
K. Gibb, J. E. Decker, L. P. Boivin, S. R. Das, and M. A. Buchanan
Appl. Opt. 35(19) 3607-3613 (1996)
H. C. Kandpal and K. C. Joshi
Appl. Opt. 25(10) 1693-1697 (1986)