Abstract
In a sinusoidal phase-modulating interferometer, sinusoidal modulation of the phase of the laser or the reference wave is necessary. However, modulation of the phase also involves an intensity modulation of the light, which leads to a measurement error if conventional signal processing is used. In addition, the error of modulation depth and the phase delay of demodulation also increase the measurement error. A novel signal processing, with ellipse fitting and a correction method, is proposed. Numerical simulation results and experimental results prove that the novel signal processing can compensate for the measurement error caused by the intensity modulation, the error of modulation depth, and the phase delay of demodulation.
© 2017 Optical Society of America
Full Article | PDF ArticleMore Like This
Ming Zhang, Chang Ni, Yu Zhu, Chuxiong Hu, Jinchun Hu, Leijie Wang, and Siqi Ding
Appl. Opt. 56(20) 5685-5691 (2017)
Bofan Wang, Xiangzhao Wang, Osami Sasaki, and Zhongliang Li
Appl. Opt. 51(12) 1939-1944 (2012)
Liping Yan, Zhouqiang Chen, Benyong Chen, Jiandong Xie, Shihua Zhang, Yingtian Lou, and Enzheng Zhang
Opt. Express 26(4) 4818-4831 (2018)