Abstract

We discuss a method to control the coating thickness deposited onto large and strongly curved optics by ion beam sputtering. The technique uses an original design of the mask used to screen part of the sputtered materials. A first multielement mask is calculated from the measured two-dimensional coating thickness distribution. Then, by means of an iterative process, the final mask is designed. By using such a technique, it has been possible to deposit layers of tantalum pentoxide having a high thickness gradient onto a curved substrate $500\mathrm{mm}$ in diameter. Residual errors in the coating thickness profile are below 0.7%.

© 2009 Optical Society of America

Controlling lateral thickness distributions of magnetron sputtering deposited coatings using shadow masks

Shanglin Chen, Jian Sun, Jingping Li, Kui Yi, Chenfei Wang, Jianda Shao, and Meiping Zhu
Opt. Mater. Express 14(1) 101-115 (2024)

Modeling and validation of uniform large-area optical coating deposition on a rotating drum using microwave plasma reactive sputtering

Cheng Li, Shigeng Song, Des Gibson, David Child, Hin on Chu, and Ewan Waddell
Appl. Opt. 56(4) C65-C70 (2017)

Optimization of thickness uniformity of optical coatings on a conical substrate in a planetary rotation system

Chun Guo, Mingdong Kong, Cunding Liu, and Bincheng Li
Appl. Opt. 52(4) B26-B32 (2013)

Deterministic control of thin film thickness in physical vapor deposition systems using a multi-aperture mask

John Arkwright, Ian Underhill, Nathan Pereira, and Mark Gross
Opt. Express 13(7) 2731-2741 (2005)

Analysis of the thickness uniformity improved by using wire masks for coating optical bandpass filters

Jin-Cherng Hsu
Appl. Opt. 53(7) 1474-1480 (2014)