Abstract

A method for automating refractive-index measurements of fluids has been developed. An encoded rotation stage and position-sensitive detector enable automated reading of angles typically acquired by visual means. Two tunable lasers are used to obtain index measurements at ten discrete wavelengths across the visible spectrum. This method has been implemented on a Hilger–Chance refractometer from which the bulk refractive-index values for various transparent fluids have been measured. An index measurement accuracy of better than one part in the fourth decimal place for distilled water and a few parts in the fourth decimal place for higher index fluids is obtained.

© 2008 Optical Society of America

Refractive-Index measurements of liquids used in conjunction with optical fibers

Peter R. Cooper
Appl. Opt. 22(19) 3070-3072 (1983)

Measurement of the Refractive Index of Transparent Solids and Fluids

S. Dan H. Andéasson, Silas E. Gttstaesson, and Nils-Olov Halling
J. Opt. Soc. Am. 61(5) 595-599 (1971)

Optical properties of fluids for 248 and 193 nm immersion photolithography

Simon G. Kaplan and John H. Burnett
Appl. Opt. 45(8) 1721-1724 (2006)

Measurement of the refractive index using the Talbot effect and a moire technique

J. C. Bhattacharya
Appl. Opt. 28(13) 2600-2604 (1989)

In-line refractive index measurement: a simple method based on image detection

Elisabetta Bodo, Hitesh G. B. Gowda, Ulrike Wallrabe, and Matthias C. Wapler
Appl. Opt. 62(23) 6282-6286 (2023)