Abstract
Recently, polymeric multimode optical waveguides have been widely studied for low-cost interconnection use. We describe fabrication processes for a low-loss poly(methyl methacrylate) (less than 0.1 dB/cm at 675 nm) waveguide based on the reactive-ion-etching technique and for a slope (45° mirror face) formed on the waveguide. To obtain a ridge core with a crack-free and extremely smooth surface, we applied a heating process at a temperature greater than the glass transition point and a smoothening process by solvent. Furthermore, to fabricate simultaneously both vertical and sloped sidewalls, we applied a unique phenomenon in the process that decreases the etching rate directly under a narrow opening of etching mask. By using the above fabrication techniques, we demonstrated an out-of-plane branching mirror.
© 1997 Optical Society of America
Full Article | PDF ArticleMore Like This
Manabu Kagami, Hiroshi Ito, Tadashi Ichikawa, Satoru Kato, Morihiro Matsuda, and Nobuaki Takahashi
Appl. Opt. 34(6) 1041-1046 (1995)
Sanjay Goel, John C. Pincenti, and David L. Naylor
Appl. Opt. 32(3) 318-321 (1993)
H. Mizuno, O. Sugihara, T. Kaino, N. Okamoto, and M. Hosino
Opt. Lett. 28(23) 2378-2380 (2003)