Abstract

Experiments are conducted to determine the degree of moisture effects in optical thin-film coatings, to determine how to specify moisture stability of these films, and to ensure that performance levels are met after these films are exposed to all anticipated environmental conditions. Three testing techniques, an air oven, a vacuum oven, and water immersion, are evaluated to determine which techniques best characterize the moisture stability of these films. The filters tested fall into three categories, based on their degree of stability: type I, which are inherently stable, type II, which are basically stable except under extreme conditions, and type III, which are unstable.

© 1993 Optical Society of America

Optical properties and environmental stability of oxide coatings deposited by reactive sputtering

Samad M. Edlou, Ali Smajkiewicz, and Ghanim A. Al-Jumaily
Appl. Opt. 32(28) 5601-5605 (1993)

Optical coatings deposited by reactive ion plating

Allan J. Waldorf, J. A. Dobrowolski, Brian T. Sullivan, and L. M. Plante
Appl. Opt. 32(28) 5583-5593 (1993)

Behavior of optical thin-film materials and coatings under proton and gamma irradiation

Ilaria Di Sarcina, Maria Luisa Grilli, Francesca Menchini, Angela Piegari, Salvatore Scaglione, Anna Sytchkova, and Danilo Zola
Appl. Opt. 53(4) A314-A320 (2014)

Low earth orbit environmental effects on osmium and related optical thin-film coatings

T. R. Gull, Howard Herzig, J. F. Osantowski, and A. R. Toft
Appl. Opt. 24(16) 2660-2665 (1985)

Thin film optical coatings. 1. Optical coating stabilities

Jacques Mouchart
Appl. Opt. 16(9) 2486-2490 (1977)