Abstract

Single-crystal sapphire fibers are produced by the laser heated pedestal growth technique. The fibers have attenuation coefficients of less than 2 dB/m at the Er:YAG laser wavelength of 2.94 μm and are used to deliver over 600 mJ of Er:YAG laser energy. Mechanical testing of these fibers and the sapphire fibers produced by the edge-defined, film-fed growth technique results in a measured 0.4% strain to failure when testing is done under a 4-point load. Teflon-FEP (perfluorinated ethylene propylene) is applied to sapphire fibers as a cladding. The cladding is extremely effective in preventing leakage of energy from the fibers into absorbing environments that may surround the fiber.

© 1993 Optical Society of America

Optical properties of single-crystal sapphire fibers

Rick K. Nubling and James A. Harrington
Appl. Opt. 36(24) 5934-5940 (1997)

Single-crystal laser-heated pedestal-growth sapphire fibers for Er:YAG laser power delivery

Rick K. Nubling and James A. Harrington
Appl. Opt. 37(21) 4777-4781 (1998)

Growth of single-crystal YAG fiber optics

Craig D. Nie, Subhabrata Bera, and James A. Harrington
Opt. Express 24(14) 15522-15527 (2016)

Low-loss propagation in Cr⁴⁺:YAG double-clad crystal fiber fabricated by sapphire tube assisted CDLHPG technique

K. Y. Huang, K. Y. Hsu, D. Y. Jheng, W. J. Zhuo, P. Y. Chen, P. S. Yeh, and S. L. Huang
Opt. Express 16(16) 12264-12271 (2008)

Optimizing alignment and growth of low-loss YAG single crystal fibers using laser heated pedestal growth technique

Subhabrata Bera, Craig D. Nie, Michael G. Soskind, and James A. Harrington
Appl. Opt. 56(35) 9649-9655 (2017)